top of page

Schultz & Larsen | Hunter Synthetic

In conjunction with the release of the Victory Synthetic, the Hunter Synthetic boasts similar features. The Synthetic Thumb Hole Stock in black gives the Hunter an impressive first impression, then with features such as rubber inlays for the grip and forearm and the adjustable comb, the rifle feels fantastic in hand. The new design of the thumb hole stock allows you to really lock into the grip for a firm and positive feel, with the rubber inlays providing comfort and a non slip hold.

The Hunter Synthetic is currently available in Right hand only.
Total weight of the full Hunter Synthetic, with 56cm Standard Barrel is 3,700g (1,345g Stock Only)

  

 

Recoil Pad

All of the Schultz & Larsen Hunter Synthetic rifles come with a black rubber recoil pad fitted. The "Schultz & Larsen" logo is embossed onto the pad.

Grip Cap

The Schultz & Larsen Hunter Synthetic features a black synthetic grip cap with the "S&L" embossed on it.

Scope Mounting

The top of the Hunter action is milled to accept the Schultz & Larsen ‘Slide & Lock” scope mounts, incorporating Summer and Winter scope position.  For those who prefer a different mount, the action is drilled and tapped to accept Weaver or other bases.  The radius of the action is 17mm and the hole spacing 22mm

Sling Swivels

There are three sling swivel studs pre-fitted to the Hunter Synthetic Thumbhole. One on the rear of the stock, just in front of the recoil pad, and two on the front of the forearm. The swivel studs accept sling swivels of 8mm wide, with 3.5mm pin diamter. See our available options in the Accessories Section.

Switch Barrel System

The Hunter Synthetic has a switch barrel system allowing the barrel to be changed for any other in its calibre group with just a simple 5mm Hex wrench.  The standard bolt can be used with all calibres in the standard calibre group but if changing to a Magnum calibre you will need to change the bolt.

Safe Construction

Safety has top priority with all locking parts designed and tested to withstand at least three times normal load.  In the case of an overload resulting in a primer blow-out or case rupture, the high pressure gas can escape through holes in the front of the action and on the side of the bolt.  This coupled, with the extremely tight fit of the bolt and action, ensures that the shooter is not injured.

The safety catch is three position and locks the bolt and blocks the firing pin.  The centre position allows unloading of the rifle whilst the safety is engaged.

The Hunter Bolt

The bolt lift is 60º making it a fast an effective mechanism. The perfectly machined bolt glides into the action effortlessly and locks into the barrel once closed. The Hunter's bolt handle is a straight arm, dovetailed into the bolt body. There are two variations of bolt, one is typically marked "S" for Standard Calibres and the other is marked "M" for Magnum Calibres.



 

Calibres | Standard

.22-250 (K)6mm XC (1 Skud)
.243 Win (K).25-06 (L)
6.5x47 Lapua (K)6.5x55 SE (L)
6.5-284 (M)6.5 Creedmoor (K)
.270 Win (L)7x57 (L)
7x64 (L)7mm-08 (K)
.308 Win (K).30-06 (L)
.338-06 (L)8 x 57 JS (L)
9.3x62 (L) 

Calibres | Magnum (Magnum Bolt Required)

7mm Rem Mag (M).300 Win Mag (M)
.300 WSM (KM).270 WSM (KM)

Schultz & Larsen Hunter Synthetic .270

€2,950.00Price
    bottom of page